DMIS Execution Error Code List

Error Code

Meaning

-145/145

Failed to send the PTMEAS command

-130,130, -135, -142,-144, -413

Machine error while measuring a point

-131,131,-139,-412

Failed in getting the touch point

-125,-126,-127,-128,-129, -1131,-21001,-21070,
-21800,-21810,-21078, -21767,-21910,-599,
-601,-507,-6014, -7120, -7250, -7251, -7205, -7207

User cancelled the execution

-146,-136,-140, -1130,-147,-320, -20321,
-20322,-20313, -20323,-20324,-20325,-20326,
-327,-151, -7212, -7902, -15151, -15161, -15171,
-15181, -15121, -15161, -15191, -15525, -15532

Machine didn’t finish the motion properly

-132,-134,-138,-21030, ,-21055,-21700,-21811,
-21077,-21870,-21900, -7211, -7212, -15150,
-15152, -15160, -15162, -15170, -15172, -15180,
-15182, -15120, -15199, -15199, -15526, -15531,
-15535

Machine error

-137

Failed in measure the feature in auto-mode

-1137,-141, -20710

Failed in measure the point in auto-mode

-2002, -588,-251,-271,-254,-255, -7006, -7008,
-7020, -8000,-8003, -8005, -8006, -8007, -8009,
-8011, -8013, -8014, -8019

Cannot find an actual

-2001, -598,-257,-252,-253,-256,-6001,-6006
-6013, -7005, -7007, -7009, -7019, -7121,-8004,
-8008, -8010, -8015

Cannot find a nominal

-2003,-6035

Cannot add a nominal

-10000

Failed in computing a feature

-1190

Machine Error/User cancelled execution

-20000

Error in measuring the feature in auto-mode

-30000

Error in measuring the feature in auto-mode

-21000

Execution path is empty

-20803

Error in scanning the circle

-20802, -20314,-20315,-20316,-21910,-317,-318,
-7901, -15153, -15163, -15173, -15183, -15123,
-15163, -15193, -15524, -15530, -15535

Cannot star the motion/Machine error/Finish motion

-20801

Error in executing a laser scanning command

-20800

Error in measuring a point using the laser sensor

-20312,-163

Cannot star the motion

-20410, -20411

Cannot measure a point during path execution

-20420,-21060

User cancelled the motion during path execution

-21900

Problem in calibrating the probe

-21920

Encountered a problem in post-calibration

-21880

Failed in collecting touch points

-211

User chose cancel the search-parameters-dialog

Failed to calculate the distance

-271

Couldn’t output the form profile of a feature

-301

Failed to compute the true position of a feature

-501,-6009,-6010,-6019,-6020,-6036,-6053,-6054,
-6071,-6078,-7014, -7016

Cannot find a variable

-11000

A problem in executing a tool/tip change operation

-6001,-6002,-6004,-6005,-6007

Cannot find a report item

-6003,-6008

Cannot find an SPC item

-6011

The user cancelled the data entry dialog

-6012,-6030,-6037,-6038,-6039,-6040,-6051,-6075,
-6076,-6081

Couldn’t evaluate a variable

-6023

Failed to save a variable

-6025

Failed to set the value of an integer/double variable

-6026

Empty variable value

-6027

Failed to find a variable

-6050,-6052, -6070,-6072

Cannot find an opened device/file

-6070

Encountered an error in executing STDOUT

-6073

Couldn’t open a file/device

-6074

Couldn’t write to a device/file

-6077

Couldn’t evaluate and indexed label

-7000

Invalid/Missing JUMP label

-7001

The SPC list is empty

-7002

Cannot find the SPC variable

-7003

User cancelled the execution during the DMIS pause command

-7004, -7099

The SPC variable does not exist

-7010

Failed in homing the probe head

-7011

Failed to load the sensor list

-7012

Failed to load the datums list

-7013

Sensor does not exist

-212

User cancelled table rotation

-2111

User cancelled while executing TEXT/Operator command

-7018

User cancelled switching to AUTO mode

-1200

Improper 5-axis configuration

-7136

User cancelled probe-head indexing

-7175,-7200

Cannot find an optimum probe

-7125

Nominal type does not match the measured-feature type

-7252

User cancelled execution while taking a laser shot in manual mode

-7253

Failed to take a laser shot in manual mode

-7254

Failed in measuring a point in manual mode

-7255

Insufficient points for feature calculations

-7257

Cannot construct the feature from laser scanned data

-210

User cancelled execution while taking a space point

-131

Didn’t get all the required measurements (points/laser shots)

-7132

Failed in constructing an MGP alignment

-7137

Improper constraints for 3dBest-fit alignment calculations

-7139

Error in 3dBest-fit alignment calculations (CAD case)

-7140

The 3dBest-fit alignment doesn’t achieve the imposed tolerance

-7141

Error in 3dBest-fit alignment calculations (Nominals case)

-7142

Error in constructing the alignment using 321 method

-249

Error in constructing the alignment using CAD-align method

-7143

Error in constructing the alignment using simple-321 method

-8001

Cannot rotate the alignment (b-value)

-8002

Cannot rotate the alignment (a-value)

-8012

Alignment does not exist

-8016

Failed to construct a curve by best-fit

-8017

Failed to construct a surface by best-fit

-8018

Failed to construct a feature by best-fit

-8020, -8021

Failed to find a feature (actual or nominal) for construction

-8022

Failed in intersecting a curve with a geometric feature

-8023

Failed in intersecting a plane with another plane

-8024, -8025

Failed in intersecting a circle with a line

-8026

Failed in intersecting a circle with a sphere

-8027, -8028

Failed in intersecting a plane with a sphere

-8029

Failed in intersecting circle with a circle

-8030, -8031

Failed in finding the minimum circumscribing slot tangent to a curve

-8032

Failed in finding the tangency point(s) between a line a circle

-8033, -8034

Failed in constructing a line tangent to a circle

-7201

User cancelled indexing the probe-head

-7202

Sensor does not exist

-7203

Machine is not manual mode

-7204, -7208

User cancelled moving the probe head to A=0 and B=0

-7206

User cancelled moving the probe head to A=90 and B=180

-7209

User cancelled Auto-calibration-list execution

-3500

Unknown DMIS command

-4000

Encountered sever problem during DMIS execution

-7210

Cannot start the motion

-40009, -50009

Sensor doesn’t exist.

-40010, -50010

User cancelled probe-head indexing

-40006, -50006

Machine error after indexing the probe head

-40001, -50001

Machine error in switching to the auto mode

-40002, -50002

Error in changing the position speed

-40003, -50003

Error in changing the measure speed

-40004, -50004

Error in changing the approach distance

-40005, -50005

Error in changing the retract distance

-40008, -50008

Error in changing the search distance

-40007, -50007

Alignment does not exist

-40011, -50011

A problem in setting the work-plane

-8122

Cannot find an actual needed for setting the work-plane

-8123

Cannot find a nominal needed for setting the work-plane

-15163

Cannot start a DCC motion during a tool/tip change operation

-15151

Cannot finish a DCC motion during a tool/tip change operation

-15560

Failed to compare a feature to CAD

-15700

Cannot find a suitable sensor that matches the given vector!

-15310

Couldn’t finished buffered moves

-15124

Failed in executing an arc move

-15600

Failed to take a laser shot

-15350

Failed in scanning the circle`

-15351

Failed in helical scanning

-15480

Failed in scanning

-15321

The scanning results in no points

-15790

Unsupported scanning

-15791

A problem happened during scanning

-15325

A problem during data collection

-15197

The sensor does not exist

-15527, -15529

Couldn’t measure a point

-40300,-40301,-40310,-40320

User cancelled laser-sensor related command in manual mode

-40001

Failed to finish laser scanning properly

-40002

Failed start laser scanning

-40003

Failed to pause laser scanning

-40004

Failed to resume laser scanning

-40350

Failed in getting a laser-scan line